Catalog
Loading...
Welcome to the land of Kitakami,...
Subcategorias
Replacement part for these models: Unlimited Desert Racer®
Set of six 4 mm set screws (grub screws) with threadlock Replacement part for these models: E-Revo® VXL Brushless Jato® Nitro Slash Revo® Slayer® Pro 4X4 Summit T-Maxx® TRX® 2.5R TRX® 3.3
Heavy-duty 160 mm X-Maxx® steel constant-velocity driveshaft for 8s-spec heavy duty drivetrain. 6s truck upgrade also requires 7751X, 7754X, and 7768 or 7768R to complete installation. Replacement part for these models: X-Maxx®
The heavy-duty input shaft features a steel 22-tooth input gear that's press-fit onto a broad flat for maximum durability and power transfer. Use as a direct replacement for Magnum 272R™ transmissions or as an upgrade for standard Magnum 272™ transmissions.
TUBES 102 mm aluminum toe links are lighter than steel and stronger than titanium. Made from high-grade 7075-T6 aluminum, TUBES features a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included 7 mm aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES are sold in pairs and...
Set of eight 5 mm black flanged serrated steel nylon locking nuts Replacement part for these models: Maxx® Unlimited Desert Racer®
This hardened-steel idler gear provides maximum durability and power transfer in Magnum 272™ transmissions. Includes idler shaft. Use as a direct replacement for Magnum 272R™ transmissions or as an upgrade for Magnum 272 transmissions.
Replacement part for these models:XRT™Accessory part for these models:X-Maxx®
Replacement part for these models:XRT™Accessory part for these models:X-Maxx®
Replacement part for these models:XRT™Accessory part for these models:X-Maxx®
Lighting Control SystemAccessory part for these models:TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979 Ford® Bronco®TRX-4® Chevrolet® K10 High Trail Edition™TRX-4® Equipped with Traxx®TRX-4® Ford® Bronco®TRX-4® Ford® F-150® High Trail Edition™TRX-4® Land Rover® Defender®TRX-4® Sport Unassembled KitTRX-4® SportTRX-4® Unassembled KitTRX-6® Mercedes-Benz® G 63®...
Pair of replacement differential pinion gear drive cups with boots (2) and screw pins (2). Fits front or rear differential. Replacement part for these models: Sledge®
Replacement part for these models:Bandit®Accessory part for these models:Bandit®Bandit® VXL
52-tooth steel spur gear (1.0 metric pitch) fits Sledge® center differential. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific...
Replacement differential carrier with O-rings (2) and ring gear gasket fits front, rear, or center differentials. Replacement part for these models: Sledge®
Black grille and mount for 9211-series TRX-4® Ford® Bronco bodies. Includes 2.8x8 mm screws (6) and 3x8 mm screws (4). Replacement part for these models: TRX-4® Ford® Bronco® Accessory part for these models: TRX-4® Land Rover® Defender® TRX-4® Unassembled Kit
13-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes a set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for...
Replacement gear cover for Magnum 272 transmissions. Includes gear cover plug and 3x6 mm screws. Replacement part for these models:Bandit® VXLBandit®BIGFOOT® No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet® C10 TruckFord® F-150 RaptorRustler® VXLRustler®Slash 2WD Unassembled KitSlash VXLSlashStampede® VXLStampede®
Black cover for TRX-6® rear differentials. Includes T-Lock fork. Replacement part for these models: TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX-6® Ultimate RC Hauler
Metal hanger for tuned pipe with 4x8 screw and 3x10 screw Replacement part for these models: Jato®
Sledge® was built to a new level of precision and toughness to create a unique driving experience. The new High-Output Light Kit extends your fun with dual front light bars to illuminate the path ahead. A rear light bar with integrated brake lights allows you to track Sledge’s progress from behind. Sledge’s rugged roof skid protects the light bars against...
All the lighting control of a full-scale truck is at your fingertips with the Pro Scale® LED Light Set for your TRX-4® Sport. Turn the headlights on and off and select high or low beams. Signal for turns with automatic cancellation or put on the hazard lights. The brake lights glow when you slow or stop. Hit reverse, and backup lights glow automatically....
All the lighting control of a full-scale Blazer or K10 is at your fingertips with the Pro Scale® LED Light Set for your 1979 TRX-4® Chevrolet® Blazer and K10 High Trail Edition. Turn the headlights on and off and select high or low beams. Signal for turns with automatic cancellation or put on the hazard lights. The brake lights glow when you slow or stop....
Is it time to upgrade your Slash® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body or drill mounting holes because Traxxas pre-painted bodies come ready to mount right out of the bag. Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4...
Is it time to upgrade your Slash® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body or drill mounting holes because Traxxas pre-painted bodies come ready to mount right out of the bag. Accessory part for these models: Slash 4X4 Ultimate Slash 4X4 VXL...
The dual cooling fan kit adds twin fans and a low-profile shroud to the 3362X low-profile aluminum heat sink. Includes screws (8). Replacement part for these models: XRT® Ultimate XRT®
Change up the color on your low-CG-equipped 2WD Slash with these black nerf bars. Does not fit standard chassis. Accessory part for these models: Drag Slash 1967 Chevrolet® C10 Truck Ford® F-150 Raptor Slash 2WD Unassembled Kit Slash VXL Slash
The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included balance lead adapters. Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery...
Set of six 3x10 mm screw pins with hex-drive heads
Replacement 68 mm driveshaft for Traxxas 1/16 scale steel CV driveshafts (7151X).
Pair of 1/16 scale SCT off-road tires come pre-glued and mounted with foam inserts to satin-chrome SCT wheels with red beadlock-style trim. Includes one left and one right. Fits 12 mm hex.
Drive cup (1)/ 4x15.8mm screw pin (1) (for #8950X or 8996X steel CV driveshafts)Replacement steel drive cup with 4x15.8 mm screw pin. Fits 8950X or 8996X steel CV driveshafts. Accessory part for these models: Maxx®
The replacement Pro-Built® center differential comes completely assembled and ready to install into your Unlimited Desert Racer® with new bearings. Accessory part for these models: Unlimited Desert Racer®
Pair of replica black batteries Replacement part for these models: Unlimited Desert Racer®
Pair of black replica shock reservoirsReplacement part for these models:Unlimited Desert Racer®
Bumper, front / bumper support (fits Slash® 4X4) (for LED light kit installation)Replacement front bumper and bumper mount for Slash® 6894 LED light kit Replacement part for these models:Slash 4X4Accessory part for these models:Slash 4X4 UltimateSlash 4X4 VXLSlash 4X4
LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for 4WD Stampede®) Replacement front LED light bar for Slash and Stampede LED light kits. Includes 3x8 screws (2), and 2.5x8 screws (2). Requires front bumper...
Is it time to refresh your Ford® Fiesta® ST Rally with an all-new body? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body or drill mounting holes because Traxxas pre-painted bodies come ready to mount right out of the bag. Accessory part for these models: Ford Fiesta® ST...
Replacement part for these models:TRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® Equipped with Traxx®TRX-4® Ford® BroncoTRX-4® Scale and Trail™ CrawlerTRX-4® Sport Unassembled KitTRX-4® SportTRX-4® Unassembled KitTRX-6® Mercedes-Benz® G 63® AMG 6X6TRX-6® Ultimate RC HaulerAccessory part for these models:TRX-4® Chevrolet® K10 High Trail Edition
Replacement part for these models:Hoss® 4X4 VXLSlash 4X4 VXLSlash 4X4Stampede® 4X4 VXL
Product Dimensions: 14.22 x 1.65 x 1.65 cm; 9.07 Grams
Wheelie barThe Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Maxx wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport your Maxx to the next adventure.
Body, E-Revo®, Solar Flare (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)Is it time to upgrade your E-Revo with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. ProGraphix bodies come fully-assembled and ready to mount with...
Header spring and gaskets for the TRX® 2.5, 2.5R, and 3.3 racing engines. Accessory part for these models: Revo® Slayer® Pro 4X4
Ultra-rugged Sledgehammer tires provide extreme traction and control for various off-road terrain. The Sledgehammer's increased overall diameter offers additional ground clearance, while the open block tread design clears mud and debris for unmatched traction on loose surfaces. The 2.8” black wheels utilize a 17 mm hex mounting pattern for use with a...
Chassis, Revo® (3mm 6061 T-6 aluminum) (anodized blue)Replacement Revo® chassis is made from blue-anodized 6061-T6 aluminum. Fits original short-chassis Revo.
Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top speeds that Traxxas models are built to deliver. Traxxas’ exclusive iD battery system is the easier and safer way to charge your Traxxas batteries. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed...
The TRX-4M 1/18 scale utility trailer stows all your scale gear and attaches securely to your truck with the included hitch. Challenge your trailering skills by backing the utility trailer into position using your TRX-4M. Trailer comes fully assembled and ready use. Includes hitch, rear pre-load shock spacers (2) and 2.5 x8 mm screws (2) Accessory part...
Aggressive BFGoodrich® KR3 tires with foam inserts come pre-glued and mounted to black replica Method® Race Wheels with blue replica beadlock rings. Wheels require 17 mm hex hub. Sold as a pair. Accessory part for these models: Unlimited Desert Racer®