Catalog
Loading...
Viewed products
Replacement part for these models:...
Subcategorias
Replacement part for these models: Maxx®
Take advantage of the full USB-C standard with the Traxxas 100-watt USB-C power cable. Not all USB-C cables are created equal. When combined with the 2912 Traxxas 45-watt power supply, the Traxxas USB-C power cable is guaranteed to maximize output for fast, reliable charging.
Take advantage of the full USB-C standard with the Traxxas USB-C 45-watt power adapter. Not all power adapters are created equal. When combined with the 2916 Traxxas 100-watt USB-C cable, the Traxxas 45-watt power adapter is guaranteed to maximize output for fast, reliable charging. Power Adapter Features: 45-watt output Single USB-C port 39 x 39 x 47 mm
The CV driveshaft rebuild kit includes all the hardware needed to rebuild two front or center driveshafts Accessory part for these models: TRX-4M™ 1/18 Land Rover® Defender® TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco®
Add strength and style to your X-Truck™ with these aluminum motor mounts. The mounts are machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish and laser-etched logo. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Aluminum Motor MountsMilled from...
Pro Scale® LED light set, front & rear, complete (includes light harness, zip ties (6)) (fits #9811 body) Add scale lighting to your 1/18 scale TRX-4M™ Chevrolet® K10 for an extra layer of fun and good looks. The Pro Scale® Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs....
Driveshaft, steel constant-velocity (shaft only, 96mm) (1)96 mm steel constant-velocity driveshaft Replacement part for these models:Unlimited Desert Racer®
Designed for power-hungry drivers who push their Sledge to the extreme, the heavy-duty 52-tooth Mod 1 (1.0-metric pitch) spur gear is machined from hardened steel for extra-long life. These let you fine-tune the performance of your Sledge. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult...
Rear bumper and skid plate with tie bar mount and 2 3x25 mm screws Replacement part for these models: Sledge®
Front bumper and skid plate with tie bar mount and 2 3x25 mm screws Replacement part for these models: Sledge®
190 mm steel CV driveshaft is a direct replacement for the X-Maxx® WideMaxx® suspension kit Replacement part for these models: XRT® Accessory part for these models: X-Maxx®
Replacement gear set for 2090 servo Replacement part for these models: Maxx®
Steering blocks, left & right/ 4x16mm BCS (4)/ M4x0.7 NL (4) Left and right steering blocks with 4x16 mm screws (4) and washers (4) Replacement part for these models: Sledge®
Wing, green/ 4x12mm FCS (4) Green XRT® wing with 4x12 mm screws (4)
Accessory part for these models: Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede® 4X4 VXL Stampede® 4X4
Traxxas aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these high-grade hop-up parts provide razor-sharp handling and high-tech style.
Left and right green aluminum caster blocks improve the appearance, ruggedness, and control of your Traxxas model. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX logo.
Traxxas aluminum shock towers are made from tough 7075-T6 aluminum for extra strength and support and finished off with brilliant anodizing for a touch of style. Our shock towers are precision-machined for a perfect factory fit to maintain your vehicle’s race-bred geometry. Includes body mount bracket, shock mounting posts, and screws.
Traxxas aluminum shock towers are made from tough 7075-T6 aluminum for extra strength and support and finished off with brilliant anodizing for a touch of style. Our shock towers are precision-machined for a perfect factory fit to maintain your vehicle’s race-bred geometry. Includes body mount bracket, shock mounting posts, and screws.
Add vibrant color to your Rustler 4X4® with this functional rear wing. The wing reduces drag while still providing valuable downforce for high speed stability.The wing mounts directly to the internal body reinforcements for lasting durability. Includes hardware.
Traxxas aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry. The complete installation kit includes hardened-steel hinge pins, e-clips, and hardware.
Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for Slash 4X4 models, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation.Replacement part for these...
Use this data link cable to connect the 6550X telemetry expander 2.0 to the 6590 high-voltage power amplifier.
The plastic multi-tool can be used to loosen castle nuts as well as upper and lower shock caps.
Captured hollow balls (4) with 3x7x1 mm shims (2), 3x6x0.5 mm shims (4), and 3x7x2 mm shims (2)
Left and right caster blocks (C-hubs) with 4 kingpin bushings Replacement part for these models: Sledge®
Extreme Scale DetailThe Traxxas 4-Tec 3.0 Corvette Stingray set the standard for replica scale detail in 1/10 RC models. With so much attention devoted to the Stingray’s beautiful clipless body, it’s only fitting to offer an LED light kit for even greater realism. The Corvette Stingray LED light kit fits into the body’s color-molded lenses for a perfect...
Stub axle, aluminum, (blue-anodized) (1) (for use only with #7750X or 7896 driveshaft) Add a touch of style to your X-Maxx® or XRT® with this brightly-anodized aluminum stub axle. (for use with 7750X and 7896 8s-spec heavy duty driveshafts only)Replacement part for these models:X-Maxx®XRT®
Motor mounts (front and rear)/ pins (2) Front and rear motor mounts with pinsReplacement part for these models:X-Maxx®XRT®
Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft) Rebuild kit for use with 7750X heavy duty X-Maxx driveshafts. Kit includes pins for 2 driveshaft assemblies.Replacement part for these models:X-Maxx®XRT®
Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2) Hardened steel shock mount pin set includes 4x25 mm pins (2) and 4x38 mm pins (2)Replacement part for these models:X-Maxx®XRT®
Bumper, front Front bumperReplacement part for these models:X-Maxx®
Battery hold-down (2)/ foam pad (2) Battery hold downs (2) with foam pads (2)Replacement part for these models:X-Maxx®
Battery hold-down mounts, left (2)/ right (2)/ 3x18mm CS (4) Left and right battery hold down mounts (2) with 3x18 mm screws (4)Replacement part for these models:X-Maxx®
Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)
Screws, 4x35mm button-head machine (hex drive) (6) 4x35 mm button-head machine screws with hex drive heads. Set of six.Replacement part for these models:Maxx®Sledge®Unlimited Desert Racer®X-Maxx®XRT®
Screws, 4x20mm button-head machine (hex drive) (6) 4x20 mm button-head machine screws with hex drive heads. Set of six.
Replacement part for these models: XO-1®
Accessory part for these models: XRT™
Accessory part for these models: XRT™ X-Maxx® XRT™
Use the 2-amp USB-A fast charger with your Power Cell 2s 2821 LiPo battery for fast and easy charging almost anywhere. Traxxas iD® technology delivers the perfect charge with no guesswork. Just plug the iD battery in and the charger does the rest. When the LED light turns green, the battery is charged. Replacement part for these models: TRX-4M™ 1/18...
Steel upper bulkhead tie bar and lower bulkhead tie bars (2) Replacement part for these models: X-Maxx® XRT™
Replacement X-Maxx® chassis Replacement part for these models: X-Maxx®
Replacement part for these models: Sledge®
Motor, 2000Kv 77mm, brushless (with 6.5mm gold-plated connectors & high-efficiency heatsink)The massive Velineon® 2000 kV brushless motor lays down the torque and horsepower for blistering acceleration and screaming top speed. Replacement part for these models: Sledge®
Accessory part for these models: Sledge®
Body reinforcement set, orange/ skid pads (roof) (fits #9511 body)Colorful molded body reinforcements transfer impact forces to the Sledge's® full-body frame, ensuring long-lasting fun through the toughest landings and hardest hits. Replace your worn Sledge body reinforcements or give your truck a bold new look with this colorful body reinforcement set....