Catalog
Loading...
Subcategorias
Mini Maxx® steel constant velocity shafts offer the ultimate in torque handling and efficient power transfer for high-power brushless applications.
USB-C LiPo Charging Innovation with Traxxas iD® Technology Get 2s LiPo charging virtually anywhere with the Traxxas USB-C battery charger with iD® technology. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in....
Heavy-duty suspension arms for 2WD Slash®, Stampede®, and Rustler® incorporate our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next speed run,...
TRX-4® Sport High Trail® Edition body kits come fully-painted with clipless body mounts and a pre-assembled Expedition Rack with accessories for easy mounting on your TRX-4. Add a fresh look to your existing TRX-4 Sport or any TRX-4 with a 12.3″ (312 mm) wheelbase (other TRX-4 models may require additional parts). Requires 8080X inner fenders.
Wire harness, LED lights/ zip ties (10)/ zip tie mounts (4) (fits #10350 & 10650 boat trailers)Give your Traxxas 10350 or 10650 boat trailer even more scale detail with this LED light kit.
Half shafts, center (internal splined, short (3) & internal splined, long (2))Replacement center half-shaft set includes short internal-spline halves (3) and long internal-spline halves (2).
Traxxas Stability Management (TSM) lets you experience all the extreme power, speed, and acceleration that was engineered into your Traxxas model by making it much easier to control on slippery surfaces such as loose dirt, smooth concrete, and even ice and snow. Go ahead, punch it off the line! TSM senses the vehicle’s direction and makes steering...
Heavy-duty suspension arms for Stampede®, Rustler®, Slash®, Jato 4X4® and more feature our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next...
Body, Hoss® 4X4 VXL, orange (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)Is it time to upgrade your Hoss® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Hoss bodies come fully-assembled and ready to mount with...
Body, Maxx®, green (painted)/ decal sheetFits V.1 narrow MaxxIs it time to upgrade your Maxx with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Maxx bodies come fully-assembled and ready to mount with pre-installed body mounts, roof skid plate, and tailgate protector.
Restore your X-Maxx® or XRT® to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Fits latest-generation X-Maxx. Earlier X-Maxx models may require upgraded parts.
Body, X-Maxx® Ultimate, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)Is it time to replace your X-Maxx® body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. X-Maxx Ultimate bodies come...
Body, XRT®, green (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)Is it time to upgrade your XRT® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. XRT bodies come fully-assembled and ready to mount with...
The medium pit mat is the perfect addition to your RC workbench. The chemical-resistant, heavy-gauge rubber construction takes a pounding to help protect your work surface from damage. The 24″ x 16″ (61 x 40.5 cm) size is perfect for most Traxxas 1/10 scale vehicles, with two magnetic compartments to keep screws from rolling away and specially designed...
The small pit mat is the perfect addition to your RC workbench. The chemical-resistant, heavy-gauge rubber construction takes a pounding to help protect your work surface from damage. The 19" x 13" (49 x 33 cm) size is perfect for Traxxas 1/16 and 1/18 scale vehicles, with two magnetic compartments to keep screws from rolling away and specially designed...
Give your Mini Maxx a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires either the LED light kit (part 10795) or the 3-volt power supply (part 6588X).
Toe links, steel (36mm) (2) Replacement part for these models: 4-Tec® Drift Ford® Mustang®
Replacement front lower right adjustable suspension arm Replacement part for these models: 4-Tec® Drift Ford® Mustang®
Replacement front upper adjustable suspension arm. Fits left or right side. Replacement part for these models: 4-Tec® Drift Ford® Mustang®
Replacement front and rear clipless body mount latches for 8050-series TRX-4® Land Rover® Defender® bodies. Replacement part for these models: TRX-4® Land Rover® Defender® Accessory part for these models: TRX-4® Unassembled Kit
The Extreme Heavy Duty Upgrade Kit transforms your already-tough 2WD Slash® or 2WD Raptor® into the ultimate bashing machine. Engineered for brushless power systems, the kit includes a full complement of driveline and suspension parts designed to work together as a complete package. Whether you're sending it at the skate park or preparing for a speed run,...
Propeller shaft/ flex cable Replacement Disruptor® prop shaft/flex cableReplacement part for these models:Disruptor®
Give your TRX-4M™ ultimate protection against rocks and scrapes. Made from stainless steel, these skid plates protect the axles from damage and give your truck a custom look. Accessory part for these models:TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster TruckTRX-4MT™ 1/18 1979 Ford® F-150® Monster TruckTRX-4M™ 1/18 1979 Chevrolet® K10 High Trail...
Latch, body mount (2)/ 3x8 BCS (8)Body mount latches for 9211-series TRX-4® Ford® Bronco bodies with 3x8 mm screws (8)Keep the Fun Going SaleReplacement part for these models:TRX-4® 1979 Chevrolet® Blazer®TRX-4® Equipped with Traxx®TRX-4® Ford® Bronco®TRX-4® Sport High Trail Edition™TRX-4® SportTRX-6® Mercedes-Benz® G 63® AMG 6X6Accessory part for these...
The 4-amp NiMH/LiPo balance charger is the perfect solution for your charging needs with 5-7 cell NiMH and 2-3 cell LiPo capability. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically determines the type of iD-equipped battery being charged and optimizes the charge settings as soon as you plug...
Steering blocks, extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as...
Chassis & body conversion kit, Slash 2WD (includes front & rear body mounts, latches, hardware) (for clipless mounting)The Slash® 2WD clipless body conversion kit allows you to convert your 1/10 scale 2WD Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the existing body mount holes to provide...
Suspension pins, outer, rear, 3.5x56.7mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2) Two 3.5x56.7 mm hardened steel outer rear suspension pins with flanged nylon locknuts (2)Replacement part for these models:Sledge®
The overdrive gear set for X-Maxx® and XRT® replaces the standard transmission gears with a 24-tooth input gear and 47-tooth output gear. The overdrive gear set increases the upper range of gearing options beyond standard high-speed gears for aftermarket low Kv motors. This gear set makes a significant change to the final drive ratio, effectively adding...
Axle carriers, rear, 6061-T6 aluminum, left & right (blue-anodized) Pair of rear aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish
Stub axle, rear, 6mm (steel-splined constant-velocity driveshaft) (2) Pair of replacement rear 6 mm stub axles for Traxxas steel CV driveshafts (6452).Replacement part for these models:XO-1®
The 3500 mAh 2-cell LiPo battery delivers maximum punch and long runtimes for your Mini Maxx®. Traxxas Certified iD®-Equipped LiPo batteries provide the on-demand power to reach the top speeds that Traxxas models are built to deliver. Traxxas’ exclusive iD battery system is the easier and safer way to charge your Traxxas batteries. Only Traxxas gives you...
Body, Ford Bronco (1979), complete (clear, trimmed, requires painting) (includes grille, side mirrors, door handles, windshield wipers, spare tire mount, decals, window masks) (requires #8072X inner fenders) (for clipless mounting)
Tires & wheels, assembled, glued (black chrome wheels, belted Sledgehammer® All-Terrain tires, dual profile (2.9" outer, 3.8" inner), foam inserts) (2) (17mm splined) (TSM® rated)
Suspension pins, lower, inner (front or rear), 4x64mm (2) (hardened steel) Pair of 4x64 mm hardened steel inner lower suspension pins. Fits front or rear. Replacement part for these models: Maxx® Slash® Maxx®
Fenders, inner (wide), front & rear (2 each)/ rock light covers (8)/ battery plate/ 3x8 flat-head screws (4) (for clipless body mounting)Wide inner front and rear fenders for clipless bodies include rock light covers (8), battery plate, and 3x8 screws (4)
Body mount, front/ adapter, front/ inserts (2) (for clipless body mounting)The front clipless body mount adapter with inserts (2) secures to the front shock tower to provide a firm base for clipless bodies.
Latch, body mounts (front & rear)Front and rear Slash clipless body mounts secure to 6966 clipless latch mounts and retainers (sold separately) for a firm hold on the body. Clipless body mounts require require 6940 body mounts for 2WD Slashes and 6976 and 10125 body mounts and adapters for 4X4 Slashes (both sold separately).
Latch mounts/ retainers (front & rear, left & right)Complete set of front and rear latch mounts and retainers for 1/10 scale Slash clipless bodies. Extra-wide retainers keep a firm hold on the body and reduce pull-though damage associated with body clips. Requires 6967 body latch mounts (sold separately).
Mount, telemetry expander (fits Spartan)The telemetry expander mount secures to the Spartan's battery tray with a hook-and-loop strap and provides stable mounting platform for the optional TQi™ Telemetry Expander.
Ring gear, differential, 47-tooth/ pinion gear, differential, 12-tooth (planetary) (front)Replacement Mini Maxx® front planetary differential gear set includes 47-tooth ring gear and 12-tooth input gear.Replacement part for these models:Mini Maxx®
Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to achieve the maximum performance Traxxas models are built to deliver. Traxxas’ exclusive iD battery system is the easier and safer way to charge your Traxxas batteries. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most...
Designed for spec-class racing, this 7.4-volt 2-cell LiPo battery features a tough outer hard case to protect against crash damage and meets sanction race requiements. The enhanced 35C discharge rate provides extra punch for brushless systems to bring home the win.
Wheel nuts, splined, 17mm, serrated (black-anodized) (4)Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability.Replacement part for these models:Jato® 4X4 VXLAccessory part for these models:E-Revo®...
Hull, Spartan SR, green graphics (fully assembled) Is it time to replace your Spartan® SR hull or upgrade to an all new look? Lightweight yet incredibly strong, Spartan SR's ABS hull cuts through waves with speed and agility. The hull features bright and colorful graphics for the hottest look on the water. The graphics are printed directly on the hull to...
Latch, body mount, rear/ rear latch mount (2) / 3x8mm BCS (4) (for clipless body mounting) (attaches to #10111 body)Rear clipless body mounts and latches with 3x8 mm screws (4) (fits 10111-series bodies)Keep the Fun Going SaleReplacement part for these models:Ford® F-150® Raptor R™ 4X4
Side mirrors (left & right)/ mirror mounts (left & right) / 3x14mm BCS (2) (attaches to #10111 body)Left and right Raptor R™ replica side mirrors. Includes 3x14 mm screws (2) (fits 10111-series bodies)Keep the Fun Going SaleReplacement part for these models:Ford® F-150® Raptor R™ 4X4
Latch, body mount, front/ hood insert/ 3x8mm BCS (5) (for clipless body mounting) (attaches to #10111 body)Replica Raptor R™ hood vent clipless body mount and latches with 3x8 mm screws (5) (fits 10111-series bodies)Keep the Fun Going SaleReplacement part for these models:Ford® F-150® Raptor R™ 4X4