Etiquetas (Tags)
Catálogo
A carregar...
The Illumineer’s Trove includes 8 randomized booster packs and helps...
Total : 292 types12 cards per pack Common : 60 types (normal / holo...
Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate...
The ultimate treasure for both collectors and players, the Illumineer’s...
Accessory part for these models: TRX-4MT™ 1/18 1979 Chevrolet® K10...
Differential housing halves (L&R) with pinion collar Replacement...
Draft Boosters are the backbone of Magic. They’re the basis of Limited...
Take your fate into your own hands with The Mines of Moria! This custom...
Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate...
Take your fate into your own hands with Escape from Khazad-dûm! This...
A new product lineup of the Dragon Super Card Game specifically designed...
Accessory part for these models: Slash® 4X4 Brushless Slash® 4X4...
Bulkhead, front Front bulkhead fits vehicles equipped with the 7422 or 7422A chassis. Replacement part for these models: Ford® Fiesta® ST Rally Slash 4X4 Ultimate
Accessory part for these models:TRX-4® Chevrolet® K10 High Trail Edition™TRX-4® Ford® F-150® High Trail Edition™
The big block installation kit makes it easy to bolt big block engine torque into your Traxxas truck. The kit includes all the components and hardware necessary for a factory-engineered, quality installation. Replacement part for these models: TRX® 2.5R TRX® 3.3 Accessory part for these models: TRX® 2.5R Revo® Slayer® Pro 4X4
Set of four captured lower spring retainers for 1/10 scale GTR shocks includes 2.5x10 mm screws (4) Accessory part for these models: Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede® 4X4 VXL Unlimited Desert Racer®
Replacement gear cover with motor wire hold-down clip Replacement part for these models: Hoss® 4X4 VXL Slash 4X4 VXL Slash 4X4 Stampede® 4X4 VXL
Pair of steel push rods come assembled with rod ends. For use with long-travel or 5357 progressive-1 rocker arms. Replacement part for these models: Revo® Summit
Replacement waterproof case for 2056 and 2075 servos. Also fits 2075X and 2075R servos. Includes gaskets.
Front and rear skid plates with rubber impact cushion Replacement part for these models: XRT™
Engine mount for Revo® big block kit Replacement part for these models: TRX® 2.5R TRX® 3.3
Black wheelie bar mounts with rear skid plate Replacement part for these models: Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4
Set of four red pistons for GTS shocks. Includes E-clips (8)
Chrome skid plate for the TRX-4® Mercedes-Benz® G 500® 4x4² includes 3x10 mm screws (4)
Differential gasket set includes ring gear gasket, X-rings (2), 12.2x18x.5 mm washer, and 12.2x18x.5 mm PTFE washer Replacement part for these models: E-Revo® VXL Brushless Sledge®
Front and rear black axle covers Replacement part for these models: TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®
Replacement part for these models: Unlimited Desert Racer®
Set of six 4 mm set screws (grub screws) with threadlock Replacement part for these models: E-Revo® VXL Brushless Jato® Nitro Slash Revo® Slayer® Pro 4X4 Summit T-Maxx® TRX® 2.5R TRX® 3.3
Replacement part for these models:XRT™Accessory part for these models:X-Maxx®
Replacement part for these models:XRT™Accessory part for these models:X-Maxx®
Replacement part for these models:XRT™Accessory part for these models:X-Maxx®
Pair of replacement differential pinion gear drive cups with boots (2) and screw pins (2). Fits front or rear differential. Replacement part for these models: Sledge®
Black grille and mount for 9211-series TRX-4® Ford® Bronco bodies. Includes 2.8x8 mm screws (6) and 3x8 mm screws (4). Replacement part for these models: TRX-4® Ford® Bronco® Accessory part for these models: TRX-4® Land Rover® Defender® TRX-4® Unassembled Kit
Replacement gear cover for Magnum 272 transmissions. Includes gear cover plug and 3x6 mm screws. Replacement part for these models:Bandit® VXLBandit®BIGFOOT® No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet® C10 TruckFord® F-150 RaptorRustler® VXLRustler®Slash 2WD Unassembled KitSlash VXLSlashStampede® VXLStampede®
31.5 mm chrome suspension pins (2). Includes E-clips (4). Replace the stock screw pins with these heavy-duty steel suspension pins that are stronger, fit more precisely, and pivot with less friction. These are required hardware for installing the #2532 tie bar.
Black cover for TRX-6® rear differentials. Includes T-Lock fork. Replacement part for these models: TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX-6® Ultimate RC Hauler
Metal hanger for tuned pipe with 4x8 screw and 3x10 screw Replacement part for these models: Jato®
Change up the color on your low-CG-equipped 2WD Slash with these black nerf bars. Does not fit standard chassis. Accessory part for these models: Drag Slash 1967 Chevrolet® C10 Truck Ford® F-150 Raptor Slash 2WD Unassembled Kit Slash VXL Slash
Replacement part for these models:X-Maxx®XRT™
Set of six 3x10 mm screw pins with hex-drive heads
Pair of replica black batteries Replacement part for these models: Unlimited Desert Racer®
Pair of black replica shock reservoirsReplacement part for these models:Unlimited Desert Racer®
Bumper, front / bumper support (fits Slash® 4X4) (for LED light kit installation)Replacement front bumper and bumper mount for Slash® 6894 LED light kit Replacement part for these models:Slash 4X4Accessory part for these models:Slash 4X4 UltimateSlash 4X4 VXLSlash 4X4
Slipper clutch input shaft with bearing adapter and dowel pin
Replacement part for these models:TRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® Equipped with Traxx®TRX-4® Ford® BroncoTRX-4® Scale and Trail™ CrawlerTRX-4® Sport Unassembled KitTRX-4® SportTRX-4® Unassembled KitTRX-6® Mercedes-Benz® G 63® AMG 6X6TRX-6® Ultimate RC HaulerAccessory part for these models:TRX-4® Chevrolet® K10 High Trail Edition
Replacement part for these models:Hoss® 4X4 VXLSlash 4X4 VXLSlash 4X4Stampede® 4X4 VXL
Product Dimensions: 14.22 x 1.65 x 1.65 cm; 9.07 Grams
Wheelie barThe Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Maxx wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport your Maxx to the next adventure.
Header spring and gaskets for the TRX® 2.5, 2.5R, and 3.3 racing engines. Accessory part for these models: Revo® Slayer® Pro 4X4
The TRX-4M 1/18 scale utility trailer stows all your scale gear and attaches securely to your truck with the included hitch. Challenge your trailering skills by backing the utility trailer into position using your TRX-4M. Trailer comes fully assembled and ready use. Includes hitch, rear pre-load shock spacers (2) and 2.5 x8 mm screws (2) Accessory part...
Throttle dust boots (2) with return spring for TRX® 2.5, 2.5R, and 3.3 engines. Replacement part for these models: TRX® 2.5R TRX® 3.3
Black front suspension arms (L&R) Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Nitro Slash Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®
Replacement part for these models: E-Revo® VXL Brushless
Accessory part for these models:X-Maxx®
Accessory part for these models:X-Maxx®
Extreme Upgrade Kit Features: Maxx®Duty driveshafts with 6mm stub axles Heavy-duty caster blocks, steering blocks, hub carriers, and shock towers Made from our toughest cold-weather composite material Steel wheel hexes Oversized sealed bearings Installation hardware included Fully compatible with HD suspension arms May not work with sway bars or other...
Replacement 80 mm steel GT-Maxx® shock shafts with chrome finish. Assembled with rod ends and hollow balls. Replacement part for these models: Sledge™
Heavy-duty Sledge® left rear suspension arms are formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look. Replacement part for these models: Sledge™
Heavy-duty Sledge® right rear suspension arms are formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look. Replacement part for these models: Sledge™