Tags
Catalog
Loading...
LED lights, wire harness (fits #9862 roll bar) Add more scale detail to your TRX-4M™ by replacing the replica lights in the 9862 roll bar with these bright LED lights. Includes wiring harness.
Accessory part for these models: TRX-4MT™ 1/18 1979 Ford® F-150® Monster TruckTRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™
Wire harness, LED lights/ zip ties (8) (fits #10350 boat trailer)Give your Traxxas boat trailer even more scale detail with this LED light kit. The light kit requires the 10348 wire harness extension when installing lights in the 10350 boat trailer.Accessory part for these models:Traxxas Boat Trailer
Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Stampede®, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation. (Rear bumper not compatible with...
LED light set, complete (includes front and rear bumpers with LED lights & BEC Y-harness) (fits 2WD Bigfoot® No. 1) Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the BIGFOOT® No. 1, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear...
Roll bar (assembled with LED lights) (fits #9811 or 9812 series bodies)Add more scale detail to your 9811-series TRX-4M™ K10 and 9812-series TRX-4M™ F-150® bodies with this chrome roll bar with working LED lights.
Maxx Slash redefines speed, durability and toughness with its innovative design and massively overbuilt chassis. Only Traxxas could design an LED light kit worthy of the Maxx Slash's extreme performance. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a path through the night with...
All the lighting control of a full-scale Blazer is at your fingertips with the Pro Scale® LED light set for your 1969 and 1972 TRX-4® Chevrolet® Blazer. Turn the headlights on and off and select high or low beams. Signal for turns with automatic cancellation or put on the hazard lights. The brake lights glow when you slow or stop. Hit reverse, and backup...
Add more scale detail to your TRX-4® Chevrolet® K10 or Ford® F-150® by replacing the replica lights in the 9262 roll bar with these bright LED lights. Includes wiring harness.
Hoss 4X4 LED Light Kit (9095):Efficient, high-intensity LED lightingFront bumper with integrated LED light barRear bumper with integrated red LED lightsRegulated power supply for stable lighting performanceEasy installation with included power tap connectorMounting hardware
LED light harness, front (fits #10151 bumper) (requires #2263 Y-harness)Raptor R™ front LED light harness (requires 2263 Y harness) Replacement part for these models:Ford® F-150® Raptor R™ 4X4
Extreme Scale DetailThe Traxxas Ford® Raptor R™ set a new standard for replica scale detail in 1/10 scale short course trucks. With so much attention devoted to the Raptor R’s beautiful clipless body, it’s only fitting to add an LED light kit for even greater realism.
Pro Scale® LED light set, Ford Raptor R (contains headlights harness) (fits #10111 series bodies)The Traxxas Ford® Raptor R™ LED headlight kit adds four bright white lights to the Raptor R's existing headlight lenses. Includes wiring harness and zip ties. For maximum effect, use the complete LED Light Kit (10190) which includes the headlights as well as a...
Ford® F-150® Raptor R™ 4X4Rustler® 4X4Rustler®Slash 4X4SlashStampede®Accessory part for these models:Rustler® 4X4Slash® 4X4 BrushlessBandit® VXLBandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler® 4X4 BrushlessRustler® 4X4 UltimateRustler® 4X4 VXLRustler® VXLRustler®Slash 2WD Unassembled KitSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Slash VXLSlashSlash®...
Ultra-bright LED roof and bumper bars for maximum forward lightingFully waterproofFits TRX-4M Bronco and Defender bodiesSimple installation with all mounting hardware included
The 2080R waterproof metal gear servo combines commanding steering authority for 1/16 scale vehicles with the superior durability of all-metal gears for the ultimate driving experience. Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Slash® 4X41/16 Summit™
Pro Scale® LED light set, front & rear, complete (includes light harness, zip ties (6)) (fits #9811 body) Add scale lighting to your 1/18 scale TRX-4M™ Chevrolet® K10 for an extra layer of fun and good looks. The Pro Scale® Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs....
Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for Slash 4X4 models, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation.Replacement part for these...
Use this data link cable to connect the 6550X telemetry expander 2.0 to the 6590 high-voltage power amplifier.
Replacement part for these models: E-Revo® VXL Brushless Unlimited Desert Racer®
Extreme Scale DetailThe Traxxas 4-Tec 3.0 Corvette Stingray set the standard for replica scale detail in 1/10 RC models. With so much attention devoted to the Stingray’s beautiful clipless body, it’s only fitting to offer an LED light kit for even greater realism. The Corvette Stingray LED light kit fits into the body’s color-molded lenses for a perfect...
Use the 2-amp USB-A fast charger with your Power Cell 2s 2821 LiPo battery for fast and easy charging almost anywhere. Traxxas iD® technology delivers the perfect charge with no guesswork. Just plug the iD battery in and the charger does the rest. When the LED light turns green, the battery is charged. Replacement part for these models: TRX-4M™ 1/18...
Replacement part for these models: Sledge®
Motor, 2000Kv 77mm, brushless (with 6.5mm gold-plated connectors & high-efficiency heatsink)The massive Velineon® 2000 kV brushless motor lays down the torque and horsepower for blistering acceleration and screaming top speed. Replacement part for these models: Sledge®
LED light set, complete with power supply (contains headlights, tail lights, side marker lights, & distribution block) (fits #8010 or 9230 series bodies) Accessory part for these models:TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979 Ford® Bronco®TRX-4® Chevrolet® K10 High Trail Edition™TRX-4® Equipped with Traxx®TRX-4® Ford® F-150® High Trail...
Replacement communication cable for the Pro Scale® Advanced Lighting Control System
The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting-edge brushless motor provides 400-ounce-inches of torque for extreme applications.* The High-Torque 400 servo...
Lighting Control SystemAccessory part for these models:TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979 Ford® Bronco®TRX-4® Chevrolet® K10 High Trail Edition™TRX-4® Equipped with Traxx®TRX-4® Ford® Bronco®TRX-4® Ford® F-150® High Trail Edition™TRX-4® Land Rover® Defender®TRX-4® Sport Unassembled KitTRX-4® SportTRX-4® Unassembled KitTRX-6® Mercedes-Benz® G 63®...
Sledge® was built to a new level of precision and toughness to create a unique driving experience. The new High-Output Light Kit extends your fun with dual front light bars to illuminate the path ahead. A rear light bar with integrated brake lights allows you to track Sledge’s progress from behind. Sledge’s rugged roof skid protects the light bars against...
All the lighting control of a full-scale truck is at your fingertips with the Pro Scale® LED Light Set for your TRX-4® Sport. Turn the headlights on and off and select high or low beams. Signal for turns with automatic cancellation or put on the hazard lights. The brake lights glow when you slow or stop. Hit reverse, and backup lights glow automatically....
All the lighting control of a full-scale Blazer or K10 is at your fingertips with the Pro Scale® LED Light Set for your 1979 TRX-4® Chevrolet® Blazer and K10 High Trail Edition. Turn the headlights on and off and select high or low beams. Signal for turns with automatic cancellation or put on the hazard lights. The brake lights glow when you slow or stop....
The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included balance lead adapters. Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery...
LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for 4WD Stampede®) Replacement front LED light bar for Slash and Stampede LED light kits. Includes 3x8 screws (2), and 2.5x8 screws (2). Requires front bumper...
TypeTotal CapacityVoltageC RatingLengthHeightWidthWeight NiMH 1800 mAh 7.2 V N/A - - - - Replacement part for these models: Jato® Nitro Rustler® Nitro Slash Revo® Slayer® Pro 4X4 T-Maxx®
Replacement waterproof digital high-torque servo with 285 oz-in torque and ball bearings. Requires Maxx® mount. Replacement part for these models: Maxx®
Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Rustler 4X4, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation. Replacement part for these...
Motor, 370 (assembled with bullet connectors)
The waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 236 oz-in of torque on tap and full metal gears, the 2270 servo provides a significant performance boost over the standard 2075 servo lineup.
Rebuild kit, Velineon® 1200XL (includes plastic endbells (2), 6x17x6mm ball bearings (2), 6x8x.3 washer (1), 6x8x1 washer (1), 7x6x12 spacer (1)) Replacement part for these models: X-Maxx®
Velineon® VXL-4s High Output Electronic Speed Control, waterproof (brushless) (fwd/rev/brake) Replacement part for these models:Maxx®
Rebuild kit, 2200Kv motor, brushless includes: plastic endbell, 5x16x5mm ball bearings (2), 5.05x7.5x.05 washer (1), 5.05x7.5x0.1 washer (1), 5.05x7.5x.19 washer (1), 6x5x15 spacer (1) Replacement part for these models:E-Revo® VXL BrushlessUnlimited Desert Racer®
Replacement part for these models: E-Revo® VXL Brushless Unlimited Desert Racer®
LED light set, front, complete (white) (includes light harness, power harness, zip ties (9)) Add menacing style to your Drag Slash with this colored LED light set. Two LEDs per side light up your Drag Slash’s front end to spark fear in the competition. The LED light set includes wiring and power harnesses and mounting hardware. Accessory part for these...
Accessory part for these models:TRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped with Traxx®TRX-4® Mercedes-Benz® G 500® 4X4²TRX-4® Scale and Trail™ CrawlerTRX-4® Sport Unassembled KitTRX-4® SportTRX-4® Unassembled KitTRX-6® Mercedes-Benz® G 63® AMG 6X6
Accessory part for these models:TRX-4® 1979 Chevrolet BlazerTRX-4® 1979 Ford BroncoTRX-4® Equipped with Traxx™TRX-4® Mercedes-Benz® G 500® 4X4²TRX-4® Scale and Trail™ CrawlerTRX-4® Sport Unassembled KitTRX-4® SportTRX-4® Unassembled KitTRX-6™ Mercedes-Benz® G 63® AMG 6X6