Catalog
Loading...
Viewed products
Subcategorias
Fits The 1/2-Offset makes your car about 25mm wider in total. We recommend the 1/2-Offset wheels over the 0-Offset wheels because you lower the risk of your tires touching suspension or body components. These tire sets fits Front - Rear •
Bulkhead, front Front bulkhead fits vehicles equipped with the 7422 or 7422A chassis. Replacement part for these models: Ford® Fiesta® ST Rally Slash 4X4 Ultimate
Accessory part for these models:TRX-4® Chevrolet® K10 High Trail Edition™TRX-4® Ford® F-150® High Trail Edition™
Set of four captured lower spring retainers for 1/10 scale GTR shocks includes 2.5x10 mm screws (4) Accessory part for these models: Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede® 4X4 VXL Unlimited Desert Racer®
Replacement gear cover with motor wire hold-down clip Replacement part for these models: Hoss® 4X4 VXL Slash 4X4 VXL Slash 4X4 Stampede® 4X4 VXL
The World’s FastestReady-to-Race® RC Supercar Battery and Charger Sold Separately
MODEL 36054-61: Fully assembled, waterproof, Ready-To-Race®, with TQ™ 2.4GHz radio system,XL-5 Electronic Speed Control, 8.4V NiMH 3000mAh Power Cell™ battery, 4-amp DC Peak Detecting Fast Charger, LED lighting, and ProGraphix® painted body. * With 7-cell battery and included optional 21-tooth pinion gear.
18-tooth machined pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing...
54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended...
Single-chamber blue-anodized aluminum Resonator tuned pipe Replacement part for these models: Jato® Accessory part for these models: Nitro Slash Nitro Rustler®
Replacement communication cable for the Pro Scale® Advanced Lighting Control System
Stake side panels are a great way to increase the hauling capacity of your TRX-4M™ Utility Trailer with a fun and authentic look. Stake sides are molded with realistic textured wood grain and holes to attach spare trailer wheels (sold separately).
1.9" aluminum beadlock rings mount to Traxxas 1.9” Method wheels for maximum tire bead grip and intense off-road action. Beadlock rings are sold in sets of four and include 2x10 mm mounting screws (48)
Is it time to upgrade your Slash® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body or drill mounting holes because Traxxas pre-painted bodies come ready to mount right out of the bag. Accessory part for these models: Slash 4X4 Ultimate Slash 4X4 VXL
The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting-edge brushless motor provides 400-ounce-inches of torque for extreme applications.* The High-Torque 400 servo...
Front and rear skid plates with rubber impact cushion Replacement part for these models: XRT™
Engine mount for Revo® big block kit Replacement part for these models: TRX® 2.5R TRX® 3.3
Black wheelie bar mounts with rear skid plate Replacement part for these models: Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4
Chrome body accessories for the TRX-4® 1979 Ford® Bronco and F-150® bodies. Includes door handles and wipers, with retainers (3) and 1.6x5 mm screws (4).
Set of four red pistons for GTS shocks. Includes E-clips (8)
Chrome skid plate for the TRX-4® Mercedes-Benz® G 500® 4x4² includes 3x10 mm screws (4)
Differential gasket set includes ring gear gasket, X-rings (2), 12.2x18x.5 mm washer, and 12.2x18x.5 mm PTFE washer Replacement part for these models: E-Revo® VXL Brushless Sledge®
Front and rear black axle covers Replacement part for these models: TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®
Replacement part for these models: Unlimited Desert Racer®
Set of six 4 mm set screws (grub screws) with threadlock Replacement part for these models: E-Revo® VXL Brushless Jato® Nitro Slash Revo® Slayer® Pro 4X4 Summit T-Maxx® TRX® 2.5R TRX® 3.3
Heavy-duty 160 mm X-Maxx® steel constant-velocity driveshaft for 8s-spec heavy duty drivetrain. 6s truck upgrade also requires 7751X, 7754X, and 7768 or 7768R to complete installation. Replacement part for these models: X-Maxx®
The heavy-duty input shaft features a steel 22-tooth input gear that's press-fit onto a broad flat for maximum durability and power transfer. Use as a direct replacement for Magnum 272R™ transmissions or as an upgrade for standard Magnum 272™ transmissions.
TUBES 102 mm aluminum toe links are lighter than steel and stronger than titanium. Made from high-grade 7075-T6 aluminum, TUBES features a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included 7 mm aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES are sold in pairs and...
Set of eight 5 mm black flanged serrated steel nylon locking nuts Replacement part for these models: Maxx® Unlimited Desert Racer®
This hardened-steel idler gear provides maximum durability and power transfer in Magnum 272™ transmissions. Includes idler shaft. Use as a direct replacement for Magnum 272R™ transmissions or as an upgrade for Magnum 272 transmissions.
Replacement part for these models:XRT™Accessory part for these models:X-Maxx®
Replacement part for these models:XRT™Accessory part for these models:X-Maxx®
Replacement part for these models:XRT™Accessory part for these models:X-Maxx®
Lighting Control SystemAccessory part for these models:TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979 Ford® Bronco®TRX-4® Chevrolet® K10 High Trail Edition™TRX-4® Equipped with Traxx®TRX-4® Ford® Bronco®TRX-4® Ford® F-150® High Trail Edition™TRX-4® Land Rover® Defender®TRX-4® Sport Unassembled KitTRX-4® SportTRX-4® Unassembled KitTRX-6® Mercedes-Benz® G 63®...
Pair of replacement differential pinion gear drive cups with boots (2) and screw pins (2). Fits front or rear differential. Replacement part for these models: Sledge®
Replacement part for these models:Bandit®Accessory part for these models:Bandit®Bandit® VXL
Based on the hugely capable TRX-6 platform, the RC Hauler is the biggest and baddest rig in the TRX lineup. The tough looks are backed up with even tougher performance.
VENDA EXCLUSIVA EM LOJAS FISICAS MODEL 92046-4: TRX-4® Scale and Trail® crawler with 1979 Ford® F-150® Ranger XLT bodyand Long Arm Lift Kit: 1/10 scale 4WD electric truck. Ready-to-Drive® with TQi™ Traxxas Link™enabled 2.4 GHz radio system, XL-5 HV ESC (fwd/rev), and Titan® 550 motor.
MODEL 24076-74: Fully assembled with Traxxas Stability Management TSM®, TQi™ 2.4GHzradio system, Velineon® Brushless Power System, Pro Series Magnum 272R™ Transmission,and ProGraphix® painted body
52-tooth steel spur gear (1.0 metric pitch) fits Sledge® center differential. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific...
Replacement differential carrier with O-rings (2) and ring gear gasket fits front, rear, or center differentials. Replacement part for these models: Sledge®
Black grille and mount for 9211-series TRX-4® Ford® Bronco bodies. Includes 2.8x8 mm screws (6) and 3x8 mm screws (4). Replacement part for these models: TRX-4® Ford® Bronco® Accessory part for these models: TRX-4® Land Rover® Defender® TRX-4® Unassembled Kit
13-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes a set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for...
Replacement gear cover for Magnum 272 transmissions. Includes gear cover plug and 3x6 mm screws. Replacement part for these models:Bandit® VXLBandit®BIGFOOT® No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet® C10 TruckFord® F-150 RaptorRustler® VXLRustler®Slash 2WD Unassembled KitSlash VXLSlashStampede® VXLStampede®
Black cover for TRX-6® rear differentials. Includes T-Lock fork. Replacement part for these models: TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX-6® Ultimate RC Hauler
Metal hanger for tuned pipe with 4x8 screw and 3x10 screw Replacement part for these models: Jato®