Catalog
Loading...
Arkham Horror LCG: Undimensioned and...
Viewed products
Our D20 Spindown dice make counting...
This ultimate box leaves nothing to...
Subcategorias
Shifting servo (for #9891 transmission)Add convenient remote-shifting capability to your TRX-4M high/low two-speed transmission with this shifting servo. The servo replaces the manual shifting lever on the transmission and plugs into channel 3 of the brushless ECM. Note: shifting servo requires installation of the 9891 two-speed transmission, 6250 TRX-4M...
Spool/ spacers (left & right)/ 2.5x8 CS (4) Differential spool with left and right spacers includes 2.5x8 mm screws (4) Replacement part for these models: Unlimited Desert Racer®
These springs are made from high-quality spring steel with a durable powder-coated finish. Different spring rates allow you tune your 4-Tec's suspension performance or compensate for lighter or heavier vehicle configurations. The higher the rate, the stiffer the spring. (3.7 rate) (Sold in pairs) Fits short Ultra Shocks.
These springs are made from high-quality spring steel with a durable powder-coated finish. Different spring rates allow you tune your 4-Tec's suspension performance or compensate for lighter or heavier vehicle configurations. The higher the rate, the stiffer the spring. (3.7 rate) (Sold in pairs) Fits short Ultra Shocks.
Plate, motor Replacement blue aluminum motor plate Replacement part for these models: BIGFOOT® 4X4 Brushless Officially Licensed Replica Ford® F-150® Raptor R™ 4X4 Hoss® 4X4 VXL Slash 4X4 VXL Slash 4X4 Slash® 4X4 Brushless Slash® 4X4 VXL EHD Slash® 4X4 VXL Stampede® 4X4 Brushless Stampede® 4X4 VXL
Ring gear, differential/ pinion gear, differential (12/47 ratio) (rear) 47-tooth ring and 12-tooth pinion gears for rear differentials Replacement part for these models: Rustler® 4X4 Slash 4X4
Accessory power supply (regulated, 3V, 3 amp)/ power tap connector (with cable)/ 3x10 BCS (2)/ 2.6x8 BCS (2) The 3-volt LED power supply is tightly-regulated to prevent flickering and dimming so your lights stay bright from the start of your run till the end. The power supply is fully waterproof to keep pace with your wildest adventures. Power tap...
Brushless Power System Features: Brushless outrunner motor More torque and low speed control than conventional designs 3350 Kv Laser-etched can Includes 11-tooth pinion gear Brushless ECM Retains all standard ECM features including Pro Scale lighting controls Field Oriented Control (FOC) Compatible with 2s LiPo power Works with both TQ™ and TQi™...
Differential kit, center (complete with steel spur gear) (aluminum carrier) (requires #10757 & #10762) The all-metal Mini Maxx® center differential absorbs driveline shocks to improve durability and distribute power evenly for maximum acceleration. Note: When installing the center differential, you must replace the standard driveshaft with a shorter...
The 47-tooth center differential spur gear (32-pitch) must be used with optional center differentials 10760 or 10760R. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on...
Pinion gear, differential (12/47 ratio) (rear) (requires #10757 with either #10758 or #10760) Use this rear differential pinion gear when installing the shorter 10757-series center driveshaft along with the optional 10758 slipper clutch or 10760-series center differential in your Mini Maxx. Accessory part for these models: Mini Maxx®
Aluminum GTR Shocks PTFE-coated aluminum shock bodies Larger oil capacity than standard shocks TiN-coated shafts eliminate stiction Threaded shock collars for easy ride height adjustment Shocks come assembled with springs Sold as a set of four
Wheelie bar, green (assembled) The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport your Mini Maxx...
Wheelie bar, orange (assembled) The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport your Mini Maxx...
Mini Maxx LED Light KitThe Mini Maxx LED light kit is built Traxxas Tough™, with factory fit and finish for easy installation. The kit includes new front and rear bumpers with white forward-facing LEDs, and rear-facing red LEDs.
Skid plate, roof (body) (with LED lights) (fits #10711 body) (requires #6588X power supply or #10795 LED light kit) The Mini Maxx® LED roof skid features white lights in the front with red in the back to enhance rear visibility. This is a standard replacement for the roof skid used in the 10795 Mini Maxx LED Light Kit. Fits 10711-series Mini Maxx bodies....
Bumper, front (with LED lights) (replacement for #10735 front bumper) (requires #6588X power supply or #10795 LED light kit) The Mini Maxx® LED front bumper incorporates a bright white LED light bar for forward illumination. This is a standard replacement for the LED front bumper used in the 10795 Mini Maxx LED Light Kit. Fits 10711-series Mini Maxx...
Bumper, rear (with LED lights) (replacement for #10735 rear bumper) (requires #6588X power supply or #10795 LED light kit) The Mini Maxx® LED rear bumper incorporates two red LED light bars to enhance rear visibility. This is a standard replacement for the LED rear bumper used in the 10795 Mini Maxx LED Light Kit. Fits 10711-series Mini Maxx bodies. Note:...
The advanced Velineon® VXL-4s™ ESC pours on the power you demand for over-the-top fun. An integrated fan cools the oversized heatsink to keep ESC temperatures down and extend run times. Bright LED status lights keep you informed with temperature and voltage warnings. Internal safety programming constantly monitors ESC performance to protect it from...
Heavy-duty suspension arms for Stampede®, Rustler®, Slash®, Jato4X4®, and more feature our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next speed run,...
Servo saver w/ adapters Replacement part for these models: Bandit® Ford® F-150® Raptor Rustler® Brushless Rustler® Slash® Brushless EHD Slash® Brushless Unassembled Kit Slash® VXL Slash®
Variable damping kit, GTR shocks (includes #1, #2, #3 pistons and stainless steel valves) The variable damping kit allow you to tune the damping performance of your 5460-series GTR shocks. Includes #1, #2, #3 pistons and stainless steel valves. Accessory part for these models: E-Revo® VXL Brushless Jato® Revo® Summit XO-1®
Differential kit, center (complete) (requires #10757 & 10762) The Mini Maxx® center differential absorbs driveline shocks to improve durability and distribute power evenly for maximum acceleration. The differential includes a factory-installed 47-tooth, 32-pitch, spur gear. The sealed differential comes pre-loaded with silicone oil to help prevent...
Driveshaft, center, aluminum (requires #10762 with either #10758 or 10760) This aluminum driveshaft is shorter than the standard driveshaft to accommodate the optional 10758 slipper clutch or 10760-series center differential. When using the aluminum driveshaft, you must also use differential pinion gear 10762. Accessory part for these models: Mini Maxx®
Driveshaft, center, plastic (requires #10762 with either #10758 or 10760) Use this short driveshaft when installing the optional 10758 slipper clutch or 10760-series center differential. When using the short driveshaft, you must also use differential pinion gear 10762. Accessory part for these models: Mini Maxx®
Replacement Mini Maxx® chassis Replacement part for these models: Mini Maxx®
New Clipless Body MountingNew to TRX-4 Land Rover Defender, clipless body mounting combines clean flowing lines with secure latching convenience. TRX-4 Defender’s hidden latches hold tight on the trail no matter how intense the action gets, but release in just seconds to access the chassis.
New Clipless Body MountingNew to TRX-4 Land Rover Defender, clipless body mounting combines clean flowing lines with secure latching convenience. TRX-4 Defender’s hidden latches hold tight on the trail no matter how intense the action gets, but release in just seconds to access the chassis.
New Clipless Body MountingNew to TRX-4 Land Rover Defender, clipless body mounting combines clean flowing lines with secure latching convenience. TRX-4 Defender’s hidden latches hold tight on the trail no matter how intense the action gets, but release in just seconds to access the chassis.
New Clipless Body MountingNew to TRX-4 Land Rover Defender, clipless body mounting combines clean flowing lines with secure latching convenience. TRX-4 Defender’s hidden latches hold tight on the trail no matter how intense the action gets, but release in just seconds to access the chassis.
From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Window masking, molded...
Replacement part for these models: BIGFOOT® 4X4 Brushless Officially Licensed Replica Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Brushless Ford® Fiesta® ST Rally Jato® 4X4 Brushless Jato® 4X4 VXL Rustler® 4X4 Brushless Rustler® 4X4 VXL Slash® 4X4 Brushless Slash® 4X4 VXL EHD Slash® Modified Stampede® 4X4 Brushless Stampede® 4X4 VXL Accessory part...
Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles)Set of four replacement 12 mm steel wheel hubs for the 9080-series Extreme Heavy Duty Upgrade Kit. Includes 2x9.8 mm pins (4). Wheel hubs are for use with the 9080 upgrade kit only and will not fit standard axles.
Toe links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #8995 WideMaxx® suspension kit)Extended TUBES aluminum toe links are lighter than steel and stronger than titanium.
Body, GT-Maxx® shock (aluminum, orange-anodized) (1)Replacement anodized-aluminum GT-Maxx® shock body. One per package.Replacement part for these models:Maxx® Slash®Maxx®Sledge®
Shock caps, aluminum (orange-anodized), GT-Maxx® shocks (4)This set of four aluminum shock caps is great way to boost the durability and style of any Traxxas vehicle equipped with GT Maxx® Shocks. The machined caps fit precisely and hold tightly, run after run, jump after jump. The caps install in minutes and add instant style with their rich anodized...
Give your Traxxas Maxx a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts. MAXX HARDWARE KIT FEATURESBlack oxide coating for improved rust...
Steering link, 5x117mm (1)/ drag link, 5x60mm (1)/ panhard link, 5x63mm (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)Revised steering links maintain ideal steering geometry when using a Long Arm Lift Kit. The blue powder coated steel finish provides durable protection and colorful style to your...
TRX-4 1979 Ford Bronco & F-150 Pro Scale LED Light Set All the lighting control of a full-scale truck is at your fingertips with the Pro Scale® LED light set for your TRX-4® 1979 Ford® Bronco or F-150® High Trail Edition™. Turn the headlights on and off and select high or low beams. Signal for turns with automatic cancellation or put on the hazard...
Wheels, wheelie bar, 6061-T6 aluminum (blue-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable,...
Black XXL-fit adult hoodie with white Traxxas® logo. 100% cotton
Decal set, hull (green) (waterproof) (for Disruptor®) Replacement part for these models:Disruptor®
MODEL 95096-4: Sledge 1/8 scale 4WD brushless monster truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4GHz radio system, VXL-6s brushless power system, and ProGraphix® clipless body. What’s In The Box:Sledge, Ready-To-Race® monster truck with Traxxas 2000kV brushless motorVXL-6s waterproof electronic speed control with integrated telemetryQuick Start...
MODEL 95096-4: Sledge 1/8 scale 4WD brushless monster truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4GHz radio system, VXL-6s brushless power system, and ProGraphix® clipless body. What’s In The Box:Sledge, Ready-To-Race® monster truck with Traxxas 2000kV brushless motorVXL-6s waterproof electronic speed control with integrated telemetryQuick Start...
MODEL 95096-4: Sledge 1/8 scale 4WD brushless monster truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4GHz radio system, VXL-6s brushless power system, and ProGraphix® clipless body. What’s In The Box:Sledge, Ready-To-Race® monster truck with Traxxas 2000kV brushless motorVXL-6s waterproof electronic speed control with integrated telemetryQuick Start...
8s MONSTER TRUCK SUPREMACYNow With Belted Sledgehammer Tires! Unrelenting 4X4 power, mammoth size, and award-winning innovation make X-Maxx the ultimate monster truck. With 30+ volts of extreme 8s power, X-Maxx defies physics, unleashing jaw-dropping acceleration and 50+ mph speed. Belted Sledgehammer® tires conquer the most extreme terrain while...
8s MONSTER TRUCK SUPREMACYNow With Belted Sledgehammer Tires! Unrelenting 4X4 power, mammoth size, and award-winning innovation make X-Maxx the ultimate monster truck. With 30+ volts of extreme 8s power, X-Maxx defies physics, unleashing jaw-dropping acceleration and 50+ mph speed. Belted Sledgehammer® tires conquer the most extreme terrain while...
90154-4 Jato® 4X4 BL-2s™: 1/8 scale 4X4 brushless buggy, Ready-To-Race® with factory-installedExtreme HD kit, waterproof electronics, TQ™ 2.4 GHz 2-channel radio system, BL-2s brushless power system, and clipless painted body. Requires: battery and charger.
Model 90376-4: Stampede® 4X4 VXL: 1/10 scale 4X4 monster truck, fully-assembled, waterproof electronics, Ready-To-Race®, with TQi™ 2.4 GHz 2-channel radio system, TSM®, HD Upgrade Kit, VXL-3s speed control, 540XL brushless motor, and clipless painted ProGraphix® body. Requires: battery and charger.
MODEL 82224-4: 1/10 scale 4X4 crawler, fully-assembled, waterproof electronics, Ready-To-Drive®, with TQ™ 2.4 GHz 2-channel radio system, XL-5 HV speed control, and clipless Body