- TRAXXAS
- BOARDGAMES
- CART GAMES
- MINIATURAS
- BRINQUEDOS
- Merchandise
- FUNKO POP!
- PDGD
- Outlet
What are you searching today?
Catalog
New products
-
-
-
-
-
-
Steel CV Driveshafts Mini Maxx
120,99 € -
-
-
-
USB-C LiPo Charging ID
17,95 € -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Heavy-Duty Suspension Arms ORNG
11,99 € -
BODY TRX-4 SPORT BLUE CLIPLESS
119,90 € -
-
-
-
Heavy-Duty Suspension Arms BLUE
13,95 € -
-
-
Pop! Marvel 80th: First Appearance Vulture 594
11,99 € -25% 15,99 €
TRX Peças Diversas Existem 1148 produtos.
-
Heavy-Duty Suspension Arms ORNG
Heavy-duty suspension arms for 2WD Slash®, Stampede®, and Rustler® incorporate our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next speed run,...
11,99 €Em stock: 1 unidades -
Half shafts, center internal splined,...
Half shafts, center (internal splined, short (3) & internal splined, long (2))Replacement center half-shaft set includes short internal-spline halves (3) and long internal-spline halves (2).
7,95 €Em stock: 8 unidades -
Heavy-Duty Suspension Arms BLUE
Heavy-duty suspension arms for Stampede®, Rustler®, Slash®, Jato 4X4® and more feature our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next...
13,95 €Em stock: 4 unidades -
Ball bearing kit, X-Maxx and XRT (complete)
Restore your X-Maxx® or XRT® to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Fits latest-generation X-Maxx. Earlier X-Maxx models may require upgraded parts.
48,95 €Em stock: 4 unidades -
Body, XRT®, green (assembled with body...
Body, XRT®, green (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)Is it time to upgrade your XRT® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. XRT bodies come fully-assembled and ready to mount with...
110,95 €ESGOTADO: em pré-encomenda -
Medium Pit Mat
The medium pit mat is the perfect addition to your RC workbench. The chemical-resistant, heavy-gauge rubber construction takes a pounding to help protect your work surface from damage. The 24″ x 16″ (61 x 40.5 cm) size is perfect for most Traxxas 1/10 scale vehicles, with two magnetic compartments to keep screws from rolling away and specially designed...
40,95 €Em stock: 10 unidades -
Small Pit Mat
The small pit mat is the perfect addition to your RC workbench. The chemical-resistant, heavy-gauge rubber construction takes a pounding to help protect your work surface from damage. The 19" x 13" (49 x 33 cm) size is perfect for Traxxas 1/16 and 1/18 scale vehicles, with two magnetic compartments to keep screws from rolling away and specially designed...
34,95 €Em stock: 10 unidades -
Toe links, steel (36mm) (2)
Toe links, steel (36mm) (2) Replacement part for these models: 4-Tec® Drift Ford® Mustang®
11,95 €Em stock: 2 unidades -
Suspension arm, front (lower right)
Replacement front lower right adjustable suspension arm Replacement part for these models: 4-Tec® Drift Ford® Mustang®
5,95 €Em stock: 1 unidades -
Suspension arm, front, upper (left or right)
Replacement front upper adjustable suspension arm. Fits left or right side. Replacement part for these models: 4-Tec® Drift Ford® Mustang®
5,95 €Em stock: 1 unidades -
Latch, body mounts (front & rear)
Replacement front and rear clipless body mount latches for 8050-series TRX-4® Land Rover® Defender® bodies. Replacement part for these models: TRX-4® Land Rover® Defender® Accessory part for these models: TRX-4® Unassembled Kit
8,95 €ESGOTADO: em pré-encomenda -
2WD Extreme Heavy Duty Upgrade Kit
The Extreme Heavy Duty Upgrade Kit transforms your already-tough 2WD Slash® or 2WD Raptor® into the ultimate bashing machine. Engineered for brushless power systems, the kit includes a full complement of driveline and suspension parts designed to work together as a complete package. Whether you're sending it at the skate park or preparing for a speed run,...
110,95 €ESGOTADO: em pré-encomenda -
Latch, body mount (2)/ 3x8 BCS (8)
Latch, body mount (2)/ 3x8 BCS (8)Body mount latches for 9211-series TRX-4® Ford® Bronco bodies with 3x8 mm screws (8)Keep the Fun Going SaleReplacement part for these models:TRX-4® 1979 Chevrolet® Blazer®TRX-4® Equipped with Traxx®TRX-4® Ford® Bronco®TRX-4® Sport High Trail Edition™TRX-4® SportTRX-6® Mercedes-Benz® G 63® AMG 6X6Accessory part for these...
7,95 €Em stock: 3 unidades -
-
Steering blocks, extreme heavy duty, red
Steering blocks, extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as...
6,95 €Em stock: 3 unidades -
Chassis & body conversion kit, Slash 2WD
Chassis & body conversion kit, Slash 2WD (includes front & rear body mounts, latches, hardware) (for clipless mounting)The Slash® 2WD clipless body conversion kit allows you to convert your 1/10 scale 2WD Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the existing body mount holes to provide...
34,95 €Em stock: 1 unidades -
Suspension pins, outer, rear, 3.5x56.7mm
Suspension pins, outer, rear, 3.5x56.7mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2) Two 3.5x56.7 mm hardened steel outer rear suspension pins with flanged nylon locknuts (2)Replacement part for these models:Sledge®
4,95 €Em stock: 3 unidades -
Stub axle, rear, 6mm
Stub axle, rear, 6mm (steel-splined constant-velocity driveshaft) (2) Pair of replacement rear 6 mm stub axles for Traxxas steel CV driveshafts (6452).Replacement part for these models:XO-1®
8,95 €ESGOTADO: em pré-encomenda -
-
3,95 €Suspension pins, lower, inner (front or...
Suspension pins, lower, inner (front or rear), 4x64mm (2) (hardened steel) Pair of 4x64 mm hardened steel inner lower suspension pins. Fits front or rear. Replacement part for these models: Maxx® Slash® Maxx®
3,95 €Em stock: 6 unidades -
19,95 €Fenders, inner (wide), front&rear (2 each)...
Fenders, inner (wide), front & rear (2 each)/ rock light covers (8)/ battery plate/ 3x8 flat-head screws (4) (for clipless body mounting)Wide inner front and rear fenders for clipless bodies include rock light covers (8), battery plate, and 3x8 screws (4)
19,95 €Em stock: 1 unidades -
7,95 €Body mount, front/ adapter, front/ inserts...
Body mount, front/ adapter, front/ inserts (2) (for clipless body mounting)The front clipless body mount adapter with inserts (2) secures to the front shock tower to provide a firm base for clipless bodies.
7,95 €Em stock: 2 unidades -
8,95 €Latch, body mounts (front & rear)
Latch, body mounts (front & rear)Front and rear Slash clipless body mounts secure to 6966 clipless latch mounts and retainers (sold separately) for a firm hold on the body. Clipless body mounts require require 6940 body mounts for 2WD Slashes and 6976 and 10125 body mounts and adapters for 4X4 Slashes (both sold separately).
8,95 €Em stock: 2 unidades -
8,95 €Mount, telemetry expander (fits Spartan)
Mount, telemetry expander (fits Spartan)The telemetry expander mount secures to the Spartan's battery tray with a hook-and-loop strap and provides stable mounting platform for the optional TQi™ Telemetry Expander.
8,95 €ESGOTADO: em pré-encomenda -
3,95 €Decal sheet, racing sponsors
Decal sheet, racing sponsorsDress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker headers. All the logotypes are faithfully produced and fully licensed.
3,95 €Em stock: 1 unidades -
8,99 €Latch, body mount, rear/ rear latch mount (2)
Latch, body mount, rear/ rear latch mount (2) / 3x8mm BCS (4) (for clipless body mounting) (attaches to #10111 body)Rear clipless body mounts and latches with 3x8 mm screws (4) (fits 10111-series bodies)Keep the Fun Going SaleReplacement part for these models:Ford® F-150® Raptor R™ 4X4
8,99 €Em stock: 4 unidades -
7,99 €Side mirrors (left & right)
Side mirrors (left & right)/ mirror mounts (left & right) / 3x14mm BCS (2) (attaches to #10111 body)Left and right Raptor R™ replica side mirrors. Includes 3x14 mm screws (2) (fits 10111-series bodies)Keep the Fun Going SaleReplacement part for these models:Ford® F-150® Raptor R™ 4X4
7,99 €Em stock: 4 unidades -
12,99 €Latch, body mount, front/ hood insert/...
Latch, body mount, front/ hood insert/ 3x8mm BCS (5) (for clipless body mounting) (attaches to #10111 body)Replica Raptor R™ hood vent clipless body mount and latches with 3x8 mm screws (5) (fits 10111-series bodies)Keep the Fun Going SaleReplacement part for these models:Ford® F-150® Raptor R™ 4X4
12,99 €ESGOTADO: em pré-encomenda -
13,99 €Tailgate trim/ trim mount/ 3x10mm BCS
Tailgate trim/ trim mount/ 3x10mm BCS (7)/ decals (attaches to #10111 body)Raptor R tailgate trim with 3x10 mm screws (7) (fits 10111-series bodies)Keep the Fun Going SaleReplacement part for these models:Ford® F-150® Raptor R™ 4X4
13,99 €ESGOTADO: em pré-encomenda -
22,99 €Grille/ grille mount/ 3x10 BCS
Grille/ grille mount/ 3x10 BCS (7) (fully assembled, includes installed headlight lenses and decals) (fits #10111 body)Raptor R™ front grille with 3x10 mm screws (7) (fits 10111-series bodies)Keep the Fun Going SaleReplacement part for these models:Ford® F-150® Raptor R™ 4X4
22,99 €Em stock: 2 unidades -
2,95 €Access plug, rubber (receiver box)
Access plug, rubber (receiver box) Replacement receiver box rubber access plug.
2,95 €Em stock: 4 unidades -
2,95 € -
32,95 €Hardware kit, complete (for TRX-4M and...
HARDWARE KIT FEATURES Black oxide coating for improved rust resistance Contains all hardware in one complete kit Tough hex-drive heads Individual box compartments Handy label for identifying hardware
32,95 €Em stock: 3 unidades -
42,95 €Hardware kit, stainless steel, complete...
STAINLESS STEEL HARDWARE KIT FEATURES Stainless steel construction for long-lasting performance Contains all hardware in one complete kit Tough hex-drive heads Individual box compartments Handy label for identifying hardware
42,95 €Em stock: 3 unidades -
127,95 €TRX-4M Portal Axle Kit
Just like the larger TRX-4®, new TRX-4M™ portal axles increase your off-road capability by raising the vehicle at the axles. Center ground clearance increases by over 10 mm and the track widens by 9 mm for a whole new level of 1/18 scale crawling capability.
127,95 €Em stock: 2 unidades -
13,95 €Shifting servo (for 9891 transmission)
Shifting servo (for #9891 transmission)Add convenient remote-shifting capability to your TRX-4M high/low two-speed transmission with this shifting servo. The servo replaces the manual shifting lever on the transmission and plugs into channel 3 of the brushless ECM. Note: shifting servo requires installation of the 9891 two-speed transmission, 6250 TRX-4M...
13,95 €Em stock: 4 unidades -
6,99 €Spring, shock (Blue) (3.7 rate) (2)
These springs are made from high-quality spring steel with a durable powder-coated finish. Different spring rates allow you tune your 4-Tec's suspension performance or compensate for lighter or heavier vehicle configurations. The higher the rate, the stiffer the spring. (3.7 rate) (Sold in pairs) Fits short Ultra Shocks.
6,99 €Em stock: 6 unidades -
6,99 €Spring, shock (red) (3.7 rate) (2)
These springs are made from high-quality spring steel with a durable powder-coated finish. Different spring rates allow you tune your 4-Tec's suspension performance or compensate for lighter or heavier vehicle configurations. The higher the rate, the stiffer the spring. (3.7 rate) (Sold in pairs) Fits short Ultra Shocks.
6,99 €Em stock: 6 unidades -
11,95 €Wheelie bar, green (assembled, Mini MAXX)
Wheelie bar, green (assembled) The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport your Mini Maxx...
11,95 €Em stock: 2 unidades -
11,95 €Wheelie bar, orange (assembled, Mini MAXX)
Wheelie bar, orange (assembled) The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport your Mini Maxx...
11,95 €Em stock: 2 unidades -
19,95 €Skid plate, roof (body) (with LED lights)...
Skid plate, roof (body) (with LED lights) (fits #10711 body) (requires #6588X power supply or #10795 LED light kit) The Mini Maxx® LED roof skid features white lights in the front with red in the back to enhance rear visibility. This is a standard replacement for the roof skid used in the 10795 Mini Maxx LED Light Kit. Fits 10711-series Mini Maxx bodies....
19,95 €Em stock: 3 unidades -
13,95 €Bumper, front (with LED lights,...
Bumper, front (with LED lights) (replacement for #10735 front bumper) (requires #6588X power supply or #10795 LED light kit) The Mini Maxx® LED front bumper incorporates a bright white LED light bar for forward illumination. This is a standard replacement for the LED front bumper used in the 10795 Mini Maxx LED Light Kit. Fits 10711-series Mini Maxx...
13,95 €Em stock: 1 unidades -
13,95 €Bumper, rear (with LED lights, replacement...
Bumper, rear (with LED lights) (replacement for #10735 rear bumper) (requires #6588X power supply or #10795 LED light kit) The Mini Maxx® LED rear bumper incorporates two red LED light bars to enhance rear visibility. This is a standard replacement for the LED rear bumper used in the 10795 Mini Maxx LED Light Kit. Fits 10711-series Mini Maxx bodies. Note:...
13,95 €Em stock: 3 unidades -
139,95 €Velineon VXL-4s High Output Electronic...
The advanced Velineon® VXL-4s™ ESC pours on the power you demand for over-the-top fun. An integrated fan cools the oversized heatsink to keep ESC temperatures down and extend run times. Bright LED status lights keep you informed with temperature and voltage warnings. Internal safety programming constantly monitors ESC performance to protect it from...
139,95 €Em stock: 6 unidades -
13,95 €Heavy-Duty Suspension Arms
Heavy-duty suspension arms for Stampede®, Rustler®, Slash®, Jato4X4®, and more feature our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next speed run,...
13,95 €Em stock: 13 unidades -
4,95 €Servo saver w/ adapters
Servo saver w/ adapters Replacement part for these models: Bandit® Ford® F-150® Raptor Rustler® Brushless Rustler® Slash® Brushless EHD Slash® Brushless Unassembled Kit Slash® VXL Slash®
4,95 €Em stock: 8 unidades -
7,95 €Variable damping kit, GTR shocks
Variable damping kit, GTR shocks (includes #1, #2, #3 pistons and stainless steel valves) The variable damping kit allow you to tune the damping performance of your 5460-series GTR shocks. Includes #1, #2, #3 pistons and stainless steel valves. Accessory part for these models: E-Revo® VXL Brushless Jato® Revo® Summit XO-1®
7,95 €Em stock: 4 unidades -
4,95 €Driveshaft, center, plastic (requires 10762)
Driveshaft, center, plastic (requires #10762 with either #10758 or 10760) Use this short driveshaft when installing the optional 10758 slipper clutch or 10760-series center differential. When using the short driveshaft, you must also use differential pinion gear 10762. Accessory part for these models: Mini Maxx®
4,95 €Em stock: 4 unidades -
17,90 €Chassis (Mini Maxx)
Replacement Mini Maxx® chassis Replacement part for these models: Mini Maxx®
17,90 €Em stock: 2 unidades -
4,99 €Suspension pin set, extreme heavy duty,...
Replacement part for these models: BIGFOOT® 4X4 Brushless Officially Licensed Replica Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Brushless Ford® Fiesta® ST Rally Jato® 4X4 Brushless Jato® 4X4 VXL Rustler® 4X4 Brushless Rustler® 4X4 VXL Slash® 4X4 Brushless Slash® 4X4 VXL EHD Slash® Modified Stampede® 4X4 Brushless Stampede® 4X4 VXL Accessory part...
4,99 €Em stock: 1 unidades
